Publication List

Komolafe, A., Torah, R., Wei, Y., Nunes‐Matos, H., Li, M., Hardy, D., ... & Beeby, S. (2019). Integrating Flexible Filament Circuits for E‐Textile Applications. Advanced Materials Technologies, 1900176. ( https://doi.org/10.1002/admt.201900176).

Liu, J., Li, Y., Yong, S., Arumugam, S., & Beeby, S. (2019). Flexible printed monolithic-structured solid-state dye sensitized solar cells on woven glass fibre textile for wearable energy harvesting applications. Scientific reports, 9. ( doi: 10.1038/s41598-018-37590-8).

Yong, S., Hillier, N., & Beeby, S. (2019). The influence of textile substrate on the performance of multilayer fabric supercapacitors. Journal of Industrial Textiles, 1528083719865038. ( https://doi.org/10.1177/1528083719865038).

Ojuroye, O. O., Torah, R. N., Komolafe, A. O., & Beeby, S. P. (2019). Embedded capacitive proximity and touch sensing flexible circuit system for electronic textile and wearable systems. IEEE Sensors Journal, 19(16), 6975-6985. ( DOI: 10.1109/JSEN.2019.2911561).

Yong, S., Shi, J., & Beeby, S. (2019). Wearable textile power module based on flexible ferroelectret and supercapacitor. Energy Technology, 7(5), 1800938. ( https://doi.org/10.1002/ente.201800938).

Komolafe, A. O., Torah, R. N., Tudor, M. J., & Beeby, S. P. (2018). Modelling and experimental validation of the effect of the elastic properties of fabrics on the durability of screen printed e-textiles. Smart Materials and Structures, 27(7), 075046. ( DOI: 10.1088/1361-665X/aac3fe).

Shi, J., Yong, S., & Beeby, S. (2018). An easy to assemble ferroelectret for human body energy harvesting. Smart Materials and Structures, 27(8), 084005. ( DOI: 10.1088/1361-665X/aabdbc/).

Grabham, N. J., Li, Y., Clare, L. R., Stark, B. H., & Beeby, S. P. (2018). Fabrication techniques for manufacturing flexible coils on textiles for inductive power transfer. IEEE sensors journal, 18(6), 2599-2606. ( DOI: 10.1109/JSEN.2018.2796138/).

Yong, S., Owen, J., & Beeby, S. (2018). Solid‐State Supercapacitor Fabricated in a Single Woven Textile Layer for E‐Textiles Applications. Advanced Engineering Materials, 20(5), 1700860. ( https://doi.org/10.1002/adem.201700860/).

Liu, J., Li, Y., Arumugam, S., Tudor, J., & Beeby, S. (2018). Investigation of low temperature processed titanium dioxide (TiO2) films for printed dye sensitized solar cells (DSSCs) for large area flexible applications. Materials Today: Proceedings, 5(5), 13846-13854. ( https://doi.org/10.1016/j.matpr.2018.02.026/).

Arumugam, S., Li, Y., Liu, J., Tudor, J., & Beeby, S. (2018). Optimized process of fully spray-coated organic solar cells on woven polyester cotton fabrics. Materials Today: Proceedings, 5(5), 13745-13752. ( https://doi.org/10.1016/j.matpr.2018.02.014/).

Liu, J., Li, Y., Arumugam, S., Tudor, J., & Beeby, S. (2018). Screen printed dye-sensitized solar cells (DSSCs) on Woven polyester cotton fabric for wearable energy harvesting applications. Materials Today: Proceedings, 5(5), 13753-13758. ( https://doi.org/10.1016/j.matpr.2018.02.015/).

Almusallam, A., Luo, Z., Komolafe, A., Yang, K., Robinson, A., Torah, R., & Beeby, S. (2017). Flexible piezoelectric nano-composite films for kinetic energy harvesting from textiles. Nano Energy, 33, 146-156. ( https://doi.org/10.1016/j.nanoen.2017.01.037/).

Paul, G., Torah, R., Beeby, S., & Tudor, J. (2017). A printed, dry electrode Frank configuration vest for ambulatory vectorcardiographic monitoring. Smart Materials and Structures, 26(2), 025029. ( https://doi.org/10.1088/1361-665X/aa5436/).

Arumugam, S., Li, Y., Senthilarasu, S., Torah, R., Kanibolotsky, A. L., Inigo, A. R., ... & Beeby, S. P. (2016). Fully spray-coated organic solar cells on woven polyester cotton fabrics for wearable energy harvesting applications. Journal of Materials Chemistry A, 4(15), 5561-5568. ( DOI: 10.1039/C5TA03389F/).

Ahmed, Z., Torah, R., Yang, K., Beeby, S., & Tudor, J. (2016). Investigation and improvement of the dispenser printing of electrical interconnections for smart fabric applications. Smart Materials and Structures, 25(10), 105021. ( DOI: 10.1088/0964-1726/25/10/105021/).

Cao, Z., Tudor, M. J., Torah, R. N., & Beeby, S. P. (2016). Screen printable flexible BiTe–SbTe-based composite thermoelectric materials on textiles for wearable applications. IEEE Transactions on Electron Devices, 63(10), 4024-4030. ( DOI: 10.1109/TED.2016.2603071/).

Luo, Z., Zhu, D., & Beeby, S. (2016). An electromechanical model of ferroelectret for energy harvesting. Smart Materials and Structures, 25(4), 045010. ( DOI: 10.1088/0964-1726/).

Arumugam, S., Li, Y., Senthilarasu, S., Torah, R., Kanibolotsky, A. L., Inigo, A. R., ... & Beeby, S. P. (2016). Fully spray-coated organic solar cells on woven polyester cotton fabrics for wearable energy harvesting applications. Journal of Materials Chemistry A, 4(15), 5561-5568. ( 10.1039/C5TA03389F/).

Cao, Z., Koukharenko, E., Tudor, M. J., Torah, R. N., & Beeby, S. P. (2016). Flexible screen printed thermoelectric generator with enhanced processes and materials. Sensors and Actuators A: Physical, 238, 196-206. ( https://doi.org/10.1016/j.sna.2015.12.016/).

Matiko, J. W., Wei, Y., Torah, R., Grabham, N., Paul, G., Beeby, S., & Tudor, J. (2015). Wearable EEG headband using printed electrodes and powered by energy harvesting for emotion monitoring in ambient assisted living. Smart Materials and Structures, 24(12), 125028.
( DOI:10.1088/0964/).

Almusallam, A., Yang, K., Zhu, D., Torah, R. N., Komolafe, A., Tudor, J., & Beeby, S. P. (2015). Clamping effect on the piezoelectric responses of screen-printed low temperature PZT/Polymer films on flexible substrates. Smart Materials and Structures, 24(11), 115030. ( DOI: 10.1088/0964-1726/).

Li, Y., Torah, R., Beeby, S., & Tudor, J. (2015). Fully direct-write dispenser printed dipole antenna on woven polyester cotton fabric for wearable electronics applications. Electronics Letters, 51(17), 1306-1308. ( DOI: 10.1049/el.2014.4156 /).

Paul, G., Torah, R., Beeby, S., & Tudor, J. (2015). Novel active electrodes for ECG monitoring on woven textiles fabricated by screen and stencil printing. Sensors and Actuators A: Physical, 221, 60-66. ( https://doi.org/10.1016/j.sna.2014.10.030/).

Wei, Yang, Torah, Russel, Yang, Kai, Beeby, Steve and Tudor, John (2014) A novel fabrication process to realize a valveless micropump on a flexible substrate. Smart Materials and Structures, 23, (2), 025034. (doi:10.1088/0964-1726/23/2/025034).

Yang, K., Freeman, C.T., Torah, R.N., Beeby, S.P. and Tudor, J. (2014) Screen Printed Fabric Electrode Array for Wearable Functional Electrical Stimulation. Sensors and Actuators A: Physical, 213, 108-115.

Paul, G., Torah, R., Beeby, S., & Tudor, J. (2014). The development of screen printed conductive networks on textiles for biopotential monitoring applications. Sensors and Actuators A: Physical, 206, 35-41. (https://doi.org/10.1016/j.sna.2013.11.026).

Paul, G., Torah, R., Yang, K., Beeby, S., & Tudor, J. (2014). An investigation into the durability of screen-printed conductive tracks on textiles. Measurement Science and Technology, 25(2), 025006.(DOI: 10.1088/0957-0233).

Chauraya, Alford, Whittow, Wulliam, Vardaxoglou, J. Yiannis, Li, Yi, Torah, Russel, Yang, Kai, Beeby, Steve and Tudor, John (2013) Inkjet printed dipole antennas on textiles for wearable communications. IET Microwaves Antennas & Propagation, 7, (9), 760-767. (doi:10.1049/iet-map.2013.0076 ).

Paul, Gordon, Torah, Russel and Yang, Kai et al. (2013) A smart textile based facial EMG and EOG computer interface. IEEE Sensors Journal, 14, (2), 1-8. (doi:10.1109/JSEN.2013.2283424).

Wei, Yang, Torah, R., Yang, Kai, Beeby, S.P. and Tudor, John (2013) Screen printing of a capacitive cantilever-based motion sensor on fabric using a novel sacrificial layer process for smart fabric applications. Measurement Science and Technology, 24, (7), 075104-[11pp]. (doi:10.1088/0957-0233/24/7/075104).

Wei, Yang, Torah, Russel, Yang, Kai, Beeby, Steve and Tudor, John (2013) A screen printable sacrificial fabrication process to realise a cantilever on fabric using a piezoelectric layer to detect motion for wearable applications. Sensors and Actuators A Physical, 203, 241-248. (doi:10.1016/j.sna.2013.08.041).

Yang, Kai, Torah, Russel, Wei, Yang, Beeby, Steve and Tudor, John (2013) Waterproof and durable screen printed silver conductive tracks on textiles. Textile Research Journal (doi:10.1177/0040517513490063).

Beeby, S., Torah, R., Tudor, J., Grabham, N., Yong, S., Arumugam, S., ... & Shi, J. (2019, July). Energy Harvesting Power Supplies for Electronic Textiles. In 2019 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS) (pp. 1-3). IEEE. (DOI: 10.1109/FLEPS.2019.8792260).

Hillier, N., Yong, S., & Beeby, S. (2018). Optimization of carbon electrodes for solid-state E-textile supercapacitors. (eprints.soton.ac.uk/id/eprint/428804).

Beeby, S., Torah, R., Tudor, J., Li, M., Komolafe, A., & Yang, K. (2018, August). Functional Electronic Textiles: Circuit Integration and Energy Harvesting Power Supplies. In 2018 International Flexible Electronics Technology Conference (IFETC) (pp. 1-3). IEEE. (DOI: 10.1109/IFETC.2018.8583839).

Komolafe, A., Torah, R., Tudor, J., & Beeby, S. (2017). Improving the durability of screen printed conductors on woven fabrics for e-textile applications. In Multidisciplinary Digital Publishing Institute Proceedings (Vol. 1, No. 4, p. 613). ( https://doi.org/10.3390/proceedings1040613).

Li, M., Tudor, J., Torah, R., & Beeby, S. (2017, May). Stress analysis of flexible packaging for the integration of electronic components within woven textiles. In 2017 IEEE 67th Electronic Components and Technology Conference (ECTC) (pp. 2133-2138). IEEE. ( DOI: 10.1109/ECTC.2017.23).

Yang, K., Meadmore, K., Hughes, A. M., Grabham, N., Spraggs, M., Freeman, C., ... & Tudor, J. (2017). Fabric based wearable technology for stroke rehabilitation. ( eprints.soton.ac.uk).

Yang, K., Meadmore, K., Hughes, A. M., Grabham, N., Spraggs, M., Freeman, C., ... & Tudor, J. (2016). Low-cost personalised instrumented clothing with integrated FES electrodes for upper limb rehabilitation. ( eprints.soton.ac.uk).

Ojuroye, O., Torah, R., Beeby, S., & Wilde, A. (2016, September). Autonomy is the key: from smart towards intelligent textiles. In Proceedings of the 2016 ACM International Joint Conference on Pervasive and Ubiquitous Computing: Adjunct (pp. 678-681). ACM. ( DOI: 10.1145/2968219.2968558 ).

Freeman, C., Tudor, M., Torah, R., Hughes, A. M., Beeby, S., & Yang, K. (2016). Printed e-textiles for wearable stroke rehabilitation. ( eprints.soton.ac.uk).

Fafoutis, X., Clare, L., Grabham, N., Beeby, S., Stark, B., Piechocki, R., & Craddock, I. (2016, June). Energy neutral activity monitoring: Wearables powered by smart inductive charging surfaces. In 2016 13th Annual IEEE International Conference on Sensing, Communication, and Networking (SECON) (pp. 1-9). IEEE. ( DOI: 10.1109/SAHCN.2016.7732986 ).

Luo, Z., Zhu, D., & Beeby, S. P. (2015). Multilayer ferroelectret-based energy harvesting insole. In Journal of Physics: Conference Series (Vol. 660, No. 1, p. 012118). IOP Publishing. ( DOI: 10.1088/1742-6596/660).

Komolafe, A. O., Torah, R. N., Yang, K., Tudor, J., & Beeby, S. P. (2015, May). Durability of screen printed electrical interconnections on woven textiles. In 2015 IEEE 65th Electronic Components and Technology Conference (ECTC) (pp. 1142-1147). IEEE. ( DOI: 10.1109/ECTC.2015.7159738).

Yang, K., Freeman, C. T., Torah, R., Beeby, S. P., & Tudor, M. J. (2015). Fabrication and Evaluation of Screen Printed Fabric Electrode Arrays. ( eprints.soton.ac.uk).

de Vos, M., Torah, R., Beeby, S., & Tudor, J. (2014). Functional electronic screen-printing–electroluminescent lamps on fabric. Procedia Engineering, 87, 1513-1516. (https://doi.org/10.1016/j.proeng.2014.11.586).

Jamel, N., Zhu, D., Almusallam, A., Torah, R., Yang, K., Beeby, S. P., & Tudor, J. (2014). Screen printed free-standing resonator with piezoelectric excitation and detection on flexible substrate. Procedia Engineering, 87, 947-950. (https://doi.org/10.1016/j.proeng.2014.11.313).

Yang, K., Torah, R., Wei, Y., Beeby, S., & Tudor, J. (2014). Water based PVA sacrificial material for low temperature MEMS fabrication and applications on e-textiles. Procedia Engineering, 87, 1565-1568. (https://doi.org/10.1016/j.proeng.2014.11.599).

Cao, Z., Koukharenko, E., Torah, R. N., Tudor, J., & Beeby, S. P. (2014). Flexible screen printed thick film thermoelectric generator with reduced material resistivity. In Journal of Physics: Conference Series (Vol. 557, No. 1, p. 012016). IOP Publishing. (doi:10.1088/1742-6596).

Almusallam, Ahmed, Torah, Russel, Zhu, Dibin, Tudor, John and Beeby, Steve (2013) Screen-printed piezoelectric shoe-insole energy harvester using an improved flexible PZTpolymer composites. At PowerMEMS 2013: the 13th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications , London, GB, 03 - 06 Dec 2013. 5pp. (doi:10.1088/1742-6596/476/1/012108).

Cao, Zhuo, Koukharenko, Elena, Tudor, M.J., Torah, Russel and Beeby, S.P. (2013) Screen printed flexible Bi2Te3-Sb2Te3 based thermoelectric generator. [in special issue: The 13th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2013) 3–6 December 2013, London, UK] Journal of Physics: Conference Series, 476, 1-5. (doi:10.1088/1742-6596/476/1/012031).

Cao, Zhuo, Koukharenko, Elena, Torah, R and Beeby, SP (2013) Exploring screen printing technology on thermoelectric energy harvesting with printing copper-nickel and bismuth-antimony thermocouples. In, Transducers 2013 & Eurosensors XXVII, Barcelona, ES, 16 - 20 Jun 2013. (doi:10.1109/Transducers.2013.6626807).

Kutzner, C., Lucklum, R., Torah, R., Beeby, S.P. and Tudor, J. (2013) Novel screen printed humidity sensor on textiles for smart textile applications. In, Transducers, Barcelona, ES, 16 - 20 Jun 2013. Elsevier, 282 -285. (doi:10.1109/Transducers.2013.6626757).

Torah, Russel, Yang, Kai, Wei, Yang, Li, Yi, de Vos, Marc, Beeby, Steve and Tudor, John (2013) Screen and inkjet printed electronics on fabrics – the next generation of E-textiles. Plastic Electronics Conference 2013, Dresden, Germany, 08 - 10 Oct 2013.

Torah, R., Yang, Kai, Wei, Yang, Beeby, S.P. and Tudor, M.J. (2013) MICROFLEX project: microfabrication production technology for MEMS on new emerging smart textiles/flexibles. Micro Nano MEMS Exhibition, Birmingham, UK, 25 - 26 Sep 2013.

Wei, Yang, Torah, R.N., Yang, Kai, Beeby, S.P. and Tudor, John (2013) A novel fabrication process to release a valveless micropump on a flexible substrate. In, The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers '2013), Barcelona, ES, 16 - 20 Jun 2013. 4pp.

Yang, Kai, Freeman, C T, Torah, R.N., Beeby, S P and Tudor, M. J. (2013) Flexible Screen Printed Fabric Electrode Array for Wearable Functional Electrical Stimulation for Medical Application. At International Conference on Flexible and Stretchable Electronics, Eindhoven, NL, 12 - 13 Nov 2013.

Yang, Kai, Torah, Russel, Beeby, Steve and Tudor, John (2013) Flexible and washable conductive textile achieved by screen printing for smart fabric applications. At 13th AUTEX World Textile Conference 2013 , Dresden, DE, 22 - 24 May 2013. 1pp.

Yang, Kai, Torah, Russel N., Beeby, Steve and Tudor, John (2013) Investigation of screen printed flexible silver to achieve washable conductors on textiles. At LOPE-C 2014, 11 - 13 Jun 2013. 12pp.

Almusallam, Ahmed, Torah, Russel, Yang, Kai, Tudor, John and Beeby, Steve (2012) Flexible low temperature piezoelectric films for harvesting from textiles. At PowerMEMS 2012: the 12th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, Atlanta, US, 02 - 05 Dec 2012.

Torah, R., Yang, Kai, Beeby, S.P. and Tudor, M.J. (2012) Screen-printed multilayer meander heater on polyester cotton. At 88th Textile Institute World Conference, Shah Alam, Selangor, Malaysia, 15 - 17 May 2012.

Li, Yi, Torah, Russel, Beeby, S.P. and Tudor, John (2012) Inkjet printed flexible antenna on textile for wearable applications. In, 2012 Textile Institute World Conference, Selangor, Malaysia, 15 - 17 May 2012.

Li, Yi, Torah, Russel, Beeby, Steve and Tudor, John (2012) An all-inkjet printed flexible capacitor for wearable applications. In, Design, Test, Integration & Packaging of MEMS/MOEMS, Cannes, FR, 25 - 27 Apr 2012. Grenoble, FR, Electronic Design Automation Publishing Association.

Li, Yi, Torah, Russel, Beeby, Steve and Tudor, John (2012) An all-inkjet printed flexible capacitor on a textile using a new poly(4-vinylphenol) dielectric ink for wearable applications. In, IEEE Sensors 2012, Taipei, TW, 28 - 31 Oct 2012. 4pp.

Wei, Yang, Torah, Russel, Yang, Kai, Beeby, Steve and Tudor, Michael John (2012) Screen printed capacitive free-standing cantilever beams used as a motion detector for wearable sensors. In, Eurosensors XXVI 2012: The 26th European Conference on Solid-State Transducers, Krakow, PL, 09 - 12 Sep 2012. 5pp.

Wei, Yang, Torah, Russel, Yang, Kai, Beeby, Steve and Tudor, John (2012) A novel fabrication process for capacitive cantilever structures for smart fabric applications. In, Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS 2012, Cannes, FR, 25 - 27 Apr 2012. 4pp, 136-139.

Wei, Yang, Torah, Russel, Yang, Kai, Beeby, Steve and Tudor, John (2012) A novel fabrication process to realise piezoelectric cantilever structures for smart fabric sensor applications. In, IEEE Sensors 2012, Taipei, TW, 28 - 31 Oct 2012. 4pp.

Butler, K., Hughes, Ann-Marie, Torah, R N, Ayala Garcia, Ivo, Tudor, M J and Metcalf, C.D. (2010) Measuring pressures at the sock/stump interface in lower limb amputees: a pilot study. At British Association of Chartered Physiotherapists in Amputee Rehabilitation (BACPAR) - Annual Conference 2010, Wolverhampton, GB,